Dear Viewers,
Today we are discuss IP features. This information is very important cisco router CLI platform. So, buildup your idea……………….
IP ADDRESS; configures the IP address for that device.
IP DEFAULT –GATEWAY; configures the default gateway address.
IP SUBNET-ZERO; enables the user of zero subnet.
IP HOST; global configuration command to manually assign host names to addresses.
IP NAME-SERVER; allows entries for up to six name servers (DNS).
IP ROUTE <destination
subnet><subnet mask>IP of next-hop router; global command used
for static routing. The permanent option will ensure the entry remains
in the table even if the path is not active.
IP ACCESS-GROUP; activates an access list on an interface.
IP CLASSLESS; allows packets to use the default route of 0.0.0.0.
IP RIP SEND VERSION; tells the router whether to send RIP1, RIP2,or both style of updates.
IP RIP RECEIVE VERSION; tells the router whether to receive RIP1, RIP2, or both style of updates.
IP MAXIMUM-PATHS; by
default, the IOS supports four equal-cost routes to the same IP subnet
in the routing table at the same time. This number cannot be changed to
between 1 and 6.
IP DOMAIN-NAME; assigns a domain name to a router.
(Continue)......
0 comments:
Post a Comment